Specifications
General Specifications
Printing resolution (dpi) |
4800* (horizontal) x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. |
---|---|
Interface |
USB Port: Hi-Speed USB * Network Port: Wired LAN: 100BASE-TX / 10BASE-T Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
USB and LAN can be used at the same time. Wi-Fi and wired LAN cannot be used at the same time. |
Print width | 8 in. (203.2 mm) (for Borderless Printing: 8.5 in. (216 mm)) |
Printable area |
Borderless printing: Top/Bottom/Left/Right margin: 0.0 in. (0.0 mm) Standard printing:
* For printable area of envelope, see below. Auto duplex printing:
|
Operating environment |
Temperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions. Recommended conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (no condensation) * For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions. |
Storage environment |
Temperature: 32 to 104 °F (0 to 40 °C) Humidity: 5 to 95 % RH (no condensation) |
Power supply |
AC 100-240 V, 50/60 Hz (The supplied power cord is only for the country or region you purchased.) |
Power consumption |
Printing: 21 W or less *1 Standby (minimum): 0.8 W or less *1*2 Standby (all ports connected): 1.6 W or less OFF: 0.3 W or less *1 USB connection to PC *2 The wait time for standby cannot be changed. |
External dimensions (W x D x H) |
Approx. 15.9 x 14.6 x 6.6 in. (Approx. 403 x 369 x 166 mm) * With the Cassette and trays retracted. |
Weight |
Approx. 14.3 lb (Approx. 6.5 kg) * With the Print Head installed. |
Print Head/Ink | Total 1792 nozzles (BK 640 nozzles, C/M/Y each 384 nozzles) |
Network Specifications
Communication protocol | TCP/IP |
---|---|
Wired LAN |
Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transfer speed: 10 M/100 Mbps (auto switching) |
Wi-Fi |
Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region. Communication distance: Indoors 164 feet/50 m * Effective range varies depending on the installation environment and location. Security: WEP (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) Setup: WPS (Push button configuration/PIN code method) WCN (WCN-NET) Easy wireless connect Other Features: Administration password |
Minimum System Requirements
Conform to the operating system's requirements when higher than those given here.
Windows
Operating System |
Windows 10, Windows 8.1, Windows 7 SP1 Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later. Printer driver and IJ Network Device Setup Utility support the following OS: Windows Server 2008 R2 SP1, Windows Server 2012 R2 and Windows Server 2016. |
---|---|
Hard Disk Space |
2.0 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. |
Display | XGA 1024 x 768 |
macOS
Operating System | OS X 10.10.5 - OS X 10.11, macOS 10.12 - macOS 10.14 |
---|---|
Hard Disk Space |
1.0 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. |
Display | XGA 1024 x 768 |
Other Supported OS
iOS, Android, Windows 10 Mobile, Chrome OS Some functions may not be available with the supported OS. Refer to the Canon web site for details. |
Mobile Printing Capability
Apple AirPrint |
PIXMA Cloud Link |
Windows 10 Mobile Print |
Mopria Print Service |
-
Internet connection or CD-ROM drive is required to install the software for Windows.
-
Internet connection is required to use Easy-PhotoPrint Editor and all the user's guide.
-
macOS: For macOS, an internet connection is required during software installation.
-
In an in-house network environment, the 5222 port must be open. Contact the network administrator for details.
Information in this manual is subject to change without notice.